Oki B6200 Maintenance Manual page 504

Removal
1) Remove the COVER REAR 500/COVER REAR 250 (PL10.2.21/9.1.12). (RRP10.9/9.4)
2) Remove the COVER REAR (PL1.1.3). (RRP1.1)
3) Remove the COVER LEFT (PL1.1.6). (RRP1.3)
4) Remove the COVER RIGHT (PL1.1.4). (RRP1.2)
5) Remove the COVER EXIT 500 (PL10.1.1)/CHUTE ASSY EXIT 250 (Reference Only). (PL9.1.14)
(RRP10.1/9.7)
6) Remove the 500 EXIT ASSY (PL10.1.2)/CHUTE LW EXT2 ASSY (PL9.1.2). (RRP10.2/9.1)
7) Remove the COVER TOP (PL1.1.7). (RRP1.4)
8) Remove the COVER FRONT (PL1.1.5). (RRP1.5)
9) Remove the SHIELD PLATE LVPS (PL12.1.3). (RRP12.1)
10) Disconnect the connector (P/J44) of the INTERLOCK S/W REAR from the LVPS (PL12.1.5).
11) Release the clamps of the HARNESS ASSY INTERLOCK2 of the INTERLOCK S/W REAR from
the clampers on the GEAR ASSY HOUSING (PL11.1.3).
12) Remove the screw (silver, 6mm) securing the INTERLOCK S/W REAR to the frame.
13) Remove the INTERLOCK S/W REAR.
Replacement
1) Install the INTERLOCK S/W REAR to the frame using the screw (silver, 6mm).
2) Secure the HARNESS ASSY INTERLOCK2 of the INTERLOCK S/W REAR to the clampers on the
GEAR ASSY HOUSING (PL11.1.3).
3) Connect the connector (P/J44) of the INTERLOCK S/W REAR to the LVPS (PL12.1.5).
4) Install the SHIELD PLATE LVPS (PL12.1.3). (RRP12.1)
5) Install the COVER FRONT (PL1.1.5). (RRP1.5)
6) Install the COVER TOP (PL1.1.7). (RRP1.4)
7) Install the 500 EXIT ASSY (PL10.1.2)/CHUTE LW EXT2 ASSY (PL9.1.2). (RRP10.2/9.1)
When installing, pull the CHUTE EXIT FUSER lever.
8) Install the COVER EXIT 500 (PL10.1.1)/CHUTE ASSY EXIT 250 (Reference Only). (PL9.1.14)
(RRP10.1/9.7)
9) Install the COVER RIGHT (PL1.1.4). (RRP1.2)
10) Install the COVER LEFT (PL1.1.6). (RRP1.3)
11) Install the COVER REAR (PL1.1.3). (RRP1.1)
There are 2 kinds of screws, make sure they are put in the right place.
12) Install the COVER REAR 500/COVER REAR 250 (PL10.2.21/9.1.12). (RRP10.9/9.4)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 – 340