Oki B6200 Maintenance Manual page 50

Step
Checking a tray feeding the paper
8 When test printing, is the paper supplied from Tray 1 or
Tray 2?
Checking CLUTCH ASSY PH for operation
Does CLUTCH ASSY PH operate normally?
9
Checks by Chapter 2 Diagnostic [Tray1/2 Feed Clutch
Test].
Checking CHUTE ASSY FDR1/2 (PL5.1.3, PL6.1.22,
PL7.1.21) for operation
10 Does each gear and roller of CHUTE ASSY FDR1/2 rotate
smoothly?
Turn each gear and roller with a finger to check.
Checking a paper feeding tray
11 When test printing, is the paper supplied fromTray 3 or
Tray 4?
Checking CLUTCH ASSY PH for operation
Does CLUTCH ASSY PH operate normally?
12
Checks by Chapter 2 Diagnostic [Option Tray1/2 Feed
Clutch Test].
Checking 550 FEEDER OPTION for operation
Does each gear and roller of 550 FEEDER OPTION rotate
13
smoothly?
Turn each gear and roller with a finger to check.
Checking CLUTCH PR-REGI for operation
Does CLUTCH PR-REGI operate normally?
14
Checks by Chapter 2 Diagnostic [Option Feeder1/2 Turn
Clutch Test].
Checking ROLL PINCH TURN (PL20.2.14) for operation
15 Does ROLL PINCH TURN rotate smoothly?
Turn ROLL PINCH TURN with a finger to check.
Check
1 - 34
Chapter 1 Troubleshooting
Yes
With tool
Go to step 9.
Go to step 11.
Without tool
Go to step 10.
Go to FIP2.16
Go to step 11. CLUTCH ASSY
Replace CHUTE
Go to step 11.
ASSY FDR1/2.
With tool
Check if the paper
Go to step 12.
is set, and then go
Without tool
Go to step 13.
Go to FIP2.25
Go to step 14. CLUTCH ASSY
Replace Option
Go to step 15.
Replace Go to FIP2.26
HVPS/MCU.
(RRP12.10)
Replace Replace ROLL
HVPS/MCU. ASSY TURN
(RRP12.10) (RRP20.13).
No
PH.
to step 8.
PH.
550 Paper
Feeder.
CLUTCH
PR-REGI.