Oki B6200 Maintenance Manual page 25

Chain Link Fault Items
003 947 Tray 2 Not In Position
003 948 Tray 3 Not In Position
003 949 Tray 4 Not In Position
003 950 Tray 1 No Paper
003 951 Tray 2 No Paper
003 952 Tray 3 No Paper
003 953 Tray 4 No Paper
Tray 1 Paper Size
003 959
Mismatch
Tray 2 Paper Size
003 960
Mismatch
Tray 3 Paper Size
003 961
Mismatch
Tray 4 Paper Size
003 962
Mismatch
003 965 ATS/APS No Paper
ATS/APS No Destination
003 966
Error
004 362 NVM Read/Write Error
Conditions of detect/Methods of treatment
Tray 2 is not set.
Defect of GUIDE TRAY L ASSY
Disconnection of wires from GUIDE TRAY L ASSY J210 to MCU PWB
J18 or loose connection.
Defect of MCU PWB
Tray 3 is not set.
Defect of OPT ASSY SIZE
Disconnection of wires from OPT ASSY SIZE J800 to PWB FEEDER
250/550 J80 or loose connection.
Defect of MCU PWB
Tray 4 is not set.
Defect of OPT ASSY SIZE
Disconnection of wires from OPT ASSY SIZE J800 to PWB FEEDER
250/550 J80 or loose connection.
Defect of MCU PWB
Out of paper in Tray 1.
Defect of Tray 1 No Paper Sensor
Disconnection of wires from Tray 1 No Paper Sensor J240 to MCU
PWB J24 or loose connection.
Defect of MCU PWB
Out of paper in Tray 2.
Defect of Tray 2 No Paper Sensor
Disconnection of wires from Tray 2 No Paper Sensor J246 to MCU
PWB J24 or loose connection
Defect of MCU PWB
Out of paper in Tray 3.
Defect of Tray 3 No Paper Sensor
Disconnection of wires from Tray 3 No Paper Sensor J852 to MCU
PWB J85 or loose connection
Defect of MCU PWB
Out of paper in Tray 4.
Defect of Tray 4 No Paper Sensor
Disconnection of wires from Tray 4 No Paper Sensor J852 to MCU
PWB J85 or loose connection
Defect of MCU PWB
The paper in Tray1 and the paper specified printing is different.
Failure of paper guide setting or breakage failure
Defect of GUIDE TRAY ASSY
Defect of MCU PWB
The paper in Tray2 and the paper specified to print are different.
Failure of paper guide setting or breakage failure
Defect of GUIDE TRAY ASSY
Defect of MCU PWB
The paper in Tray3 and the paper specified to print are different.
Failure of paper guide setting or breakage failure
Defect of OPT ASSY SIZE
Defect of MCU PWB
The paper in Tray4 and the paper specified to print are different.
Failure of paper guide setting or breakage failure
Defect of OPT ASSY SIZE
Defect of MCU PWB
The paper which is specified to print is not in the tray.
Check whether paper is set correctly or not.
Check No Paper Sensor of each tray.
No paper which is specified size, direction to print in the tray.
Failure of paper guide setting of each tray or breakage failure
Defect of each tray' s Paper Size Sensor
Correct Read/Write of NVM on MCU PWB is not possible.
When it is not recovered by powering OFF and On, replace MCU
PWB.
1 - 9
Chapter 1 Troubleshooting
Ref FIP
FIP1.13
FIP1.22
(Separate
volume)
FIP1.22
(Separate
volume)
FIP1.14
FIP1.14
FIP1.23
(Separate
volume)
FIP1.23
(Separate
volume)
FIP1.12
FIP1.12
FIP1.14
FIP1.12
FIP1.14
FIP1.12
FIP1.1