Oki B6200 Maintenance Manual page 35

Chain Link Fault Items
116 398 IPP S/W Fail
116 399 JME S/W Fail
116 701 -
116 703 PS Interpret Error
HP-GL Spool File
116 710
Overflow
PLW form composition
116 711
error
Lack of PLW form
116 712
capacity
116 714 HP-GL Command Error
PLW form registration
116 715
error
PLW form composition
116 718
error
116 720 PCL Memory Low
Lack of ART user
116 737
definition
116 738 Form composition error
Lack of form and logo
116 739
capacity
116 740 Numeric error
Conditions of detect/Methods of treatment
The serious error of IPP is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
The serious error of JME is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
Duplex printing is not available due to lack of memory.
Add memory.
If HDD doesn' t exist, install HDD.
An error is caused to PostScript (option).
Check the print data or spool setting.
Correct document size is not judged because the received data is over
the spool size of HP-GL and HP-GL2
Add the assign of HP-GL and HP-GL2 auto layout memory, or install
HDD.
Composing is not available because the drawing size and direction of
PLW form is different from the paper size and direction.
Select the paper which is the same size and direction as the registered
form.
When registering PLW form and logo data, it is not available to register
due to lack of RAM or HDD.
With referring the handling manual, delete unnecessary ones after
checking the registered form and logos.
Or add memory.
HP-GL command error is caused.
Check the print data, delete the command to cause the error, and
execute printing again.
When registering the form of PLW, it is not available to register due to
the limitation of the number of registration.
With referring the handling manual, delete unnecessary ones after
checking the registered form.
Or delete the unnecessary forms by the print command.
The specified form is not registered.
Use the registered form, or register the required form.
Lack of PCL memoryThe unnecessary port is not started.
Or adjust buffer memory size.
When it is not recovered yet, add memory.
When registering the data of user definition (external character fonts,
patterns, and so on) by ART, registering is not available due to lack of
RAM capacity.
Delete it after checking the registered user definition data.
Or add memory size.
Composing is not available because the drawing size and direction of
form is different from the paper size and direction.
Select the paper which is the same size and direction as the registered
form.
When registering PLW form and logo data, it is not available to register
due to lack of RAM or HDD.
With referring the handling manual, delete unnecessary ones after
checking the registered form and logos.
Or add memory.
Numeric is over the limited value in interpreter.
Delete the data because the value over the limit is used in printing
data.
1 - 19
Chapter 1 Troubleshooting
Ref FIP