Oki B6200 Maintenance Manual page 33

Chain Link Fault Items
116 340 Out of Memory
116 348 S/W Fail
116 349 Function Call Error
116 350 AppleTalk S/W Fail
116 351 EtherTalk S/W Fail
116 352 NetWare S/W Fail
116 353 lpd S/W Fail
116 355 SNMP Agent S/W Fail
116 356 EWS S/W Fail
116 357 PS Fatal System S/W Fail
116 358 Salutation S/W Fail
116 359 PLW S/W Fail
116 360 SMB S/W Fail
116 361 Spool HD Fatal Error
116 362 SSDP Software Fail
Conditions of detect/Methods of treatment
Lack of memory.
When it is not recovered by powering OFF and On, execute the
followings.
Add memory.
Remove PostScript (extension ROM).
The internal process error is caused in ESS PWB.
When it is not recovered by powering OFF and On, replace ESS PWB
The internal process error is caused in ESS PWB.
When it is not recovered by powering OFF and On, replace ESS PWB
The serious error of AppleTalk is caused.
An error is caused when processing the software in ESS PWB, and the
process cannot be continued after that.
Replace ESS PWB.
The serious error of EtherTalk is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
The serious error of NetWare is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
The serious error of lpd is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
The serious error of SNMP Agent is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
The serious error of EWS is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
The serious error of PS Fatal System is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
The serious error of Salutation is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
The serious error of PLW is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
The serious error of SMB is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
When accessing HDD, the serious error of HDD is caused.
Powering OFF and ON, and if the trouble is not recovered yet, execute
the followings.
Execute the HDD defect test of DC355 Hard Disk Program.
If it cannot resolve the trouble, replace HDD.
When it is not recovered yet, Replace ESS PWB.
An error is caused when processing the software in ESS PWB, and the
process cannot be continued after that.
Replace ESS PWB.
1 - 17
Chapter 1 Troubleshooting
Ref FIP