Fip-1.P14 No Fix - Oki B6200 Maintenance Manual

FIP-1.P14 No fix

Before commencing troubleshooting, check the paper transfer course. Make sure there is no foreign
articles on the transfer course, such as staples, paper clips, scraps of paper and so on.
Step
Checking FUSER ASSY
installation
Check that the levers on both
sides of the FUSER ASSY is
1
pushed down, and then re-
print the problem image.
Does the problem still occur?
Checking the paper condition
Have new, dry and recommended paper on.
2
Re-print the problem image.
Does the problem still occur?
Checking Heat Roll and Pressure Roll
Remove FUSER ASSY. (RRP8.8)
Warning; Start the operation after the FUSER ASSY
3 have cooled down.
Turn the gear of the heater roller with a finger, and check
the Heat Roll and Pressure Roll.
Are the Heat Roll and Pressure Roll damaged or stained?
Checking FUSER ASSY
Turn the gear of the Heater Roller with a finger.
4 Check the contact condition of Heat Roll and Pressure Roll
when rotating.
Do Heat Roll and Pressure Roll contact evenly?
Trouble substance
The printed image is not fixed on the paper properly. The image easily
comes off when rubbed.
ESS and possible causative parts
- FUSER ASSY (PL8.1.20)
- Heat Roll
- Pressure Roll
- PWBA ESS (PL12.1.13)
- LVPS (PL12.1.5)
Check
1 - 102
Chapter 1 Troubleshooting
Yes
Go to step 2.
Go to step 3.
Replace FUSER
Go to step 4.
Go to step [ESS Replace FUSER
and possible
causative parts].
No
End of work
End of work
ASSY.
(RRP8.8)
ASSY.
(RRP8.8)