Oki B6200 Maintenance Manual page 189

24PPM
Removal
1) Remove the COVER REAR 250 (PL9.1.12). (RRP9.4)
2) Remove the COVER REAR (PL1.1.3). (RRP1.1)
3) Remove the COVER LEFT (PL1.1.6). (RRP1.3)
4) Remove the CHUTE ASSY EXIT 250 (Reference Only) (PL9.1.14). (RRP9.7)
5) Remove the CHUTE LW EXT2 ASSY (PL9.1.2). (RRP9.1)
6) Remove the COVER TOP (PL1.1.7). (RRP1.4)
7) Release the 2 hooks of the COVER FRONT securing it to the printer by pressing down the 2 hooks
at the upper portion of it, and open it to forward.
8) Shift the COVER FRONT in the direction of the arrows. Remove the COVER FRONT from the
printer by releasing the 2 hooks at the lower portion of it.
Replacement
1) Hang the 2 hooks at the lower portion of the COVER FRONT to the printer.
2) Lock the 2 hooks at the upper portion of the COVER FRONT to the printer, and then secure it to
the printer.
3) Install the COVER TOP (PL1.1.7). (RRP1.4)
4) Install the CHUTE LW EXT2 ASSY (PL9.1.2). (RRP9.1)
When installing, put the harness of the MOTOR ASSY EXIT into the square hole of
the frame.
5) Install the CHUTE ASSY EXIT 250 (Reference Only) (PL9.1.14). (RRP9.7)
6) Install the COVER LEFT (PL1.1.6). (RRP1.3)
7) Install the COVER REAR (PL1.1.3). (RRP1.1)
8) Install the COVER REAR 250 (PL9.1.12). (RRP9.4)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 – 25