Oki B6200 Maintenance Manual page 150

• When the execution has been completed abnormally, the [Fault Diag. Completed abnormally]
screen is shown.
If the process is completed abnormally, this means that HDD has been at the end of
its useful life. In this case, replace the HDD Assy (PL5.4) immediately with a new
one.
8. Press the "MENU" key to return to the common menu screen [Diag. Menu Fault Diag.].
Reference <HDD partitions and details of their services (functions)>
Partition Default
No. capacity
1 (A) 4 GB (CE
variable)
1 (A) 4 GB (CE
variable)
2 (B) 4 GB (CE
variable)
2 (B) 4 GB (CE
variable)
With
Service
HDD
Form/Logo Operation
1
Media Operation
print 1
Print Operation
1
Electronic Operation
sort 1
Without
Remarks
HDD
Operation Changes the storage destination for the form
2 (ART EX/ART IV) and logo (ART IV), which
are registered by a client. HDD capacity is
larger.
Operation 1: Stores in an applicable area on
memory.
ART EX form → ART EX form memory
ART IV form/logo → ART IV form memory
operation
Operation 2: Stores in HD.
Operation Stores a file to be printed in a (ART EX) form
2 registration area.
Operation 1: Stores in an applicable area on
memory.
Operation 2: Stores in HD
* HDD is required to output high resolution
photograph using DocuPrint C2425 with a
standard memory capacity (64 MB). If
DocuPrint C2426 or C2425 is equipped with
an additional 256 MB of memory, 2 MB of
applicable area is reserved automatically. So,
any compressed image can be output in high
resolution whether HDD is used or not.
(However, HDD is required to output an
uncompressed image.)
Operation Changes a print image process.
2 Operation 1: Puts expanded data on memory
in Printer Service. (The process up to
decomposition and IOT output process are
executed in synchronism with each other.)
Operation 2: Stores expanded data in Printer
Service temporarily. (The process up to
decomposition and IOT output process can be
executed in asynchronism with each other.)
Operation Changes an electronic sort method.
2 Because the data for the specified number of
sheets does not need to be transferred, this
service is good for performance, etc.
Operation 1: Transmits the data for the
specified number of sheets. (ART EX Printer
Driver only)
Operation 2: Collates the data used in
Operation 1.
2 - 26
Chapter 2 Operation of Diagnostic