Oki B6200 Maintenance Manual page 208

6) After assembling the HOUSING TOP 150 to the HOUSING BASE 150 using the 4 hooks, secure
them using the 2 screws (gold tapping, 8mm) on both right and left sides, as well as the 6 screws
(gold tapping, 8mm) on the back.
After tightening the screws, move the GUIDE ASSY END 150 back and forth, and
make sure that the LINK SW SIZEs operate smoothly.
7) While pressing down the hook of the HOUSING TOP 150, install the GUIDE ASSY SD R150
(PL2.1.13) to the HOUSING TOP 150.
After installing, make sure that the 3 claws of the GUIDE ASSY SD R150 sit
correctly in the grooves of the HOUSING TOP 150.
8) While pressing down the hook of the HOUSING TOP 150, install the GUIDE ASSY SD L150
(PL2.1.11) to the HOUSING TOP 150.
After installing, make sure that the 3 claws of the GUIDE ASSY SD L150 sit
correctly in the grooves of the HOUSING TOP 150.
9) Push the PLATE ASSY BTM downward to lock.
10) With completely opened GUIDE ASSY SD L150 (PL2.1.11) and GUIDE ASSY SD R150
(PL2.1.13) to the both sides, install the GEAR PINION (PL2.1.12) to the HOUSING TOP 150.
When installing the GEAR PINION, make sure the GUIDE ASSY SD R150 and GUIDE
ASSY SD L150 are completely opened. If not, the side register may be misaligned.
11) Install the COVER CST (PL2.1.1) to the 150 PAPER CASSETTE.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 – 44