Fip2.45 Sensor Face Up Open (Pl10.1.25) - Oki B6200 Maintenance Manual

FIP2.45 SENSOR FACE UP OPEN (PL10.1.25)

Step
Possible causative parts:
SENSOR FACE UP OPEN (PL10.1.25)
GATE FU (PL10.2.6)
LEVER GATE FU (PL10.2.17)
HARNESS ASSY EXIT SNR (PL10.1.27)
HVPS/MCU (PL12.1.19)
Checking GATE FU for operation
Open COVER ASSY REAR 500.
Move LEVER GATE FU up and down. Does GATE FU
1
operate smoothly? Does the actuator go into the sensor
detecting point when LEVER GATE FU is moved up, and
out of the detecting point when down?
Checking SENSOR FACE UP OPEN for operation (1)
Remove EP CARTRIDGE.
Close COVER ASSY REAR 500.
2 Move LEVER GATE FU up and down. Does the number
increase one by one, every time LEVER GATE FU
operates?
Checks by Chapter 2 Diagnostic [Sensor/Switch Chec].
Checking HARNESS ASSY EXIT SNR for continuity
Remove 500 EXIT ASSY (PL10.1.2) (RRP10.2)
Remove HARNESS ASSY EXIT SNR.
3 Are the following continuous normally?
J29-4 <=> J291-3
J29-5 <=> J291-2
J29-6 <=> J291-1
Checking SENSOR FACE UP OPEN for operation
4 Replace SENSOR FACE UP OPEN. (RRP10.6)
Is the problem cleared?
Check
1 - 78
Chapter 1 Troubleshooting
Yes
With tool
Replace LEVER
Go to step 2.
GATE FU and
Without tool
Go to step 3.
Replace
HVPS/MCU. Go to step 3.
(RRP12.10)
Go to step 4. HARNESS ASSY
EXIT SNR.
End of work HVPS/MCU.
(RRP12.10)
No
GATE FU.
Replace
Replace