Overview
Quick Start
1-30
Complete the following steps:
1.
Establish a console session to the ProCurve Secure Router and move to
the global configuration mode context.
ProCurve> enable
ProCurve# configure terminal
2.
If you have not already done so, configure an enable mode password.
Enter:
Syntax: enable password <password>
3.
Configure a username and password for SSH access. The username and
password you enter can be used for FTP and HTTP access as well.
Syntax: username <username> password <password>
Replace <username> and <password> with an alphanumeric string of
up to 30 characters.
Configuring HTTP Access
1.
Enter the global configuration mode context.
2.
Enable the HTTP server on the router.
ProCurve(config)# ip http server
3.
If you have not already done so, configure a username and password for
the HTTP server. The username and password also secure FTP and SSH
access to the router.
Syntax: username <username> password <password>
4.
Return to the enable mode context and save your configuration.
ProCurve(config)# exit
ProCurve# write memory