Viewing Ospf Information - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Routing
14-126
Table 14-8. Interface OSPF Intervals
Interval Meaning
hello the time between sending hellos
dead the time to wait for a hello before
determining a link is down
retransmit the minimum time before sending a
new LSA
transmit delay the time assumed for an LSA to
reach a peer

Viewing OSPF Information

To view the local router's OSPF neighbors, follow these steps:
1. Move to the main OSPF windows.
a. Select Routing under Router/Bridge.
b. Click the Configure button for OSPF.
2. Scroll to the OSPF Neighbor Table window. This window displays the
router ID for each OSPF neighbor with which the local router has made
contact. If the local router and the neighbor have achieved adjacency (that
is, they are using the same OSPF database), the State should be Full.
Figure 14-95.Viewing OSPF Neighbors
Default Range
10 seconds 1 to 65,535 seconds
40 seconds 1 to 65,535 seconds
5 seconds 1 to 65,535 seconds
1 second 1 to 65,535 seconds