Erase; Write - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Overview
CLI Tools
1-18
The copy command can be used for other file TFTP management tasks
such as:
loading a running-configuration file from the TFTP server—Enter copy
tftp running-config.
loading a startup-configuration from the TFTP server—Enter copy tftp
startup-config.

erase

The erase command removes files from the specified file location.
Syntax: erase <file location> <filename>
For example, entering erase flash <filename> will delete the file you specify
from internal flash:
ProCurve# erase flash oldconfig
This command also allows you to erase files from compact flash:
ProCurve# erase cflash config1.cfg

write

This command is similar to the copy and erase commands.
Entering write memory will save the running-configuration to the startup-
configuration. In J03_01.biz and later, this file will automatically save to the
compact flash card, if present. Otherwise the startup-config file will be saved
on the router's internal flash.
Entering write erase deletes the startup-config file. If you have a compact
flash card, the startup-config is erased from cflash. If you are running the
AutoSynch™ function, this command erases startup-config from both flash
and compact flash. If you do not have a compact flash card, the file is erased
from flash.
The write network command saves the running config to a TFTP server. You
can set the filename to something meaningful to you when you are prompted
with Destination filename?.
The write terminal command is similar to the show running-config
command; it displays the current running-configuration in the CLI.