Authentication Type - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Virtual Private Networks
Figure 14-48.Specifying the Local VPN Network
If you need to allow a range of subnets access to the VPN, some of which are
not directly connected to the router, you should leave the Use Network from
pull-down menu at <Specified>. Then enter the IP address and subnet mask
for the range of subnets in the Local Subnet and Local Subnet Mask fields.
Click Next.

Authentication Type

Select whether IKE should authenticate peers using preshared keys or digital
certificates. If you choose preshared keys, you must then enter the key in the
Preshared Secret field.
If you are using digital certificates, you should select the standard. Click the
circle for either RSA Certificate or DSS Certificate.
14-65