Using the Web Browser Interface for Advanced Configuration Tasks
Enabling IP Services on the Router
C a u t i o n
14-16
Figure 14-11. Enabling and Disabling IP Services
2.
To enable the router as an SNMP server, click the box.
3.
To enable the router as an FTP server, click the box.
4.
To enable the router as a TFTP server, click the box.
5.
To access the Web browser interface, you enabled the router's HTTP
server from the CLI. To disable the HTTP server, click the box.
Disabling the HTTP Server will cause the Web browser interface to stop
functioning.
6.
To change port for the HTTP server, enter the desired port number in the
box. The default port is 80.
7.
To enable the HTTPS server, click the box.