HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 829

Using the Web Browser Interface for Advanced Configuration Tasks
Figure 14-19. Viewing Settings Established by the Firewall Wizard
10. Review the NAT settings in the Confirm Settings window. All hosts that
connect through the Private Interface will use the address on the public
interface. You can use the Back button to fix a misconfiguration or add a
server. You can also select a window from the lefthand navigation bar.
11. If the settings are correct, click Finish.
12. Click Exit to return to the main window.
13. If necessary, you can now customize settings by editing the Public and
Private security zones. See "Configuring Access Control from the Web
Browser Interface" on page 14-30.
Configuring the ProCurve Secure Router OS Firewall
14-29