HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 835

Using the Web Browser Interface for Advanced Configuration Tasks
Figure 14-25. Permitting Traffic to Enter an Interface
13. Enter a policy descriptor, which will be displayed when you view the
running-config. For example, you may want to use the policy descriptor
to document how the ACP is going to be used. You could enter:
Control access to Eth 0/1 interface
14. Select a protocol from the following choices:
• any
• TCP
• UDP
• ICMP
• GRE
• ESP
• AHP
• Specify
If you select Specify, enter the number for the protocol in the field to
the left.
Configuring Access Control from the Web Browser Interface
14-35