Link Layer Discovery Protocol
Viewing LLDP Information
12-8
--------------------------------------------------------------------
Capability Codes: R - Router, B - Bridge, H - Host, D - DOCSIS Device,
W - WLAN Access Point, r - Repeater, T - Telephone
System Name
---------------- -----------
Site B
eth 0/1
Site C
ppp 1
Steadily counts down
--------------------------------------------------------------------
Exit - 'Ctrl-C', Freeze - 'f', Resume - 'r'
Return to the command line
Figure 12-5. Viewing LLDP Neighbors in Real Time
If you want to view the entire LLDP message as it arrives, use the debug lldp
commands. (See "Viewing Real-Time LLDP Messages: debug lldp Commands"
on page 12-9.)
Viewing Local LLDP Activity
To see information about LLDP activity on the router, enter:
Syntax: show lldp
This command displays how often router interfaces send out LLDP and TTL
packets.
To view information about the messages the router has received from, as well
as transmitted to, its neighbors, enter:
Syntax: show lldp interface [<interface ID>]
Figure 12-6 shows the information that displays.
Port ID
TTL
Cap.
----
------
114
----R--- ProCurve Secu
900
----R--- ProCurve Secu
110
Stop and start the refresh
Platform
Local Int
------------ --------
eth 0/1
ppp 1