Confirm Settings - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Virtual Private Networks
14-70
Table 14-4. Settings for IPSec Security Parameters
Parameter
hash and encryption algorithms
PFS
IPSec SA lifetime

Confirm Settings

The Confirm Settings window displays the configurations for the remote and
local peer ID and VPN networks, as well as the security parameters for the
IKE and IPSec SAs. (If you selected Typical setup, the security parameters will
be set at their defaults.)
Setting
• AH—one hash algorithm:
– MD5
– SHA
• ESP—one encryption algorithm or any combination
of one encryption and one hash algorithm:
Encryption algorithms:
– DES
– 3DES
– AES (128-bit)
– AES (192-bit)
– AES (256-bit)
– Null
Hash algorithms:
– MD5
– SHA
• AH and ESP
– one AH hash algorithm and one ESP encryption
algorithm
– one AH hash algorithm and any combination of one
ESP encryption algorithm and one ESP hash algorithm
• 1
• 2
• 120 to 86,400 seconds (2 minutes to 24 hours)
• 2560 to 536,870,912 kilobytes