HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 575
Secure router
Hide thumbs
Also See for ProCurve Secure Router 7203 dl:
- Configuration manual (1114 pages) ,
- Reference manual (1455 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
c.
The LAN at Site A supports a multicast server transmitting to
239.255.255.1. Configure an ACL that permits Router A (10.1.66.10) to
support only this multicast group:
HQRouter(config)# ip access-list standard rp3
HQRouter(config-std-nacl)# permit host 239.255.255.1
3.
Configure the RP set:
HQRouter(config)# router pim-sparse
HQRouter(config-pim-sparse)# rp-address 10.1.63.1 access-group rp1
HQRouter(config-pim-sparse)# rp-address 10.1.62.4 access-group rp2
HQRouter(config-pim-sparse)# rp-address 10.1.66.10 access-group rp3
4.
Activate all interfaces and connect the router to the network.
hostname "HQRouter"
!
router pim-sparse
rp-address 10.1.63.1 access-group rp1
rp-address 10.1.62.4 access-group rp2
rp-address 10.1.66.10 access-group rp3
!
ip access-list standard rp1
deny host 239.255.255.1
permit 224.0.0.0 15.255.255.255
ip access-list standard rp2
permit 224.0.0.0 0.0.0.255
ip access-list standard rp3
permit host 239.255.255.1
Figure 11-17. Example 2: running-config for the RP Set on HQ Router
Configuring Multicast Support with PIM-SM
Configuring PIM-SM
11-47
Advertisement
Chapters
Table of Contents
Troubleshooting
