HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 877

Using the Web Browser Interface for Advanced Configuration Tasks
If you based the policy on a previous policy, the window already includes
the local network(s) for that policy. If necessary, delete it.
11. Enter the IP address and subnet mask for the remote network in the
Step 4 of 4: Destination Networks Allowed to Connect Using "<VPN
mapname>" window.
If you have based the policy on a previous policy, you can click the already
configured network. The wizard will populate the fields above with the
correct values. You can then edit the address as necessary. Click Add.
For example, you click the entry for remote IP subnet 192.168.2.0
255.255.255.0 displayed at the bottom of the window in figure 14-57. The
Web browser interface fills in the fields above as shown in figure 14-57.
Figure 14-57. Selecting an Entry to Edit
You can then edit the entry to 192.168.3.0 as shown in figure 14-58.
Figure 14-58. Creating the New Entry
Setting Up Virtual Private Networks
14-77