HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 944

Appendix A: Example Configuration
Configuring the Physical and Data Link Layers
N o t e
A-16
c. Bind the E1 interface to the PPP interface.
Dublin(config-ppp 1)# bind 1 e1 1/1 1 ppp 1
Dublin(config-ppp 1)# exit
Before connecting to the ISP, administrators activate the Secure Router OS
firewall to protect the private network.
Dublin(config)# ip firewall
3. Configure and activate the E1 interface that connects to the Berlin office.
Dublin(config)# interface e1 1/2
Dublin(config-e1 1/2)# tdm-group 1 timeslots 1-31
Dublin(config-e1 1/2)# no shutdown
4. Configure and activate the Data Link Layer connection.
a. Create and activate a Frame Relay interface.
Dublin(config-e1 1/2)# interface frame 1
Dublin(config-fr 1)# frame-relay lmi-type ansi
Dublin(config-fr 1)# no shutdown
b. Create and configure a Frame Relay subinterface.
Dublin(config-fr 1)# interface frame 1.1
Dublin(config-fr 1.1)# ip address 10.1.3.2 /30
Dublin(config-fr 1.1)# frame-relay interface-dlci 101
Dublin(config-fr 1.1)# description Connection to Berlin
c. Bind the physical interface to the logical Frame Relay interface.
Dublin(config-fr 1.1)# bind 2 e1 1/2 1 fr 1
Dublin(config-fr 1.1)# exit
5. Create an ACL for the demand interface.
Dublin(config)# ip access-list extended Demand1
Dublin(config-ext-nacl)# permit ip 192.168.192.0 0.0.0.255 192.168.128.0 0.0.0.255
Dublin(config-ext-nacl)# permit ip 192.168.192.0 0.0.0.255 192.168.129.0 0.0.0.255
Dublin(config-ext-nacl)# exit