Debugging Acls - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Configuring Network Address Translation
Troubleshooting
If you want to clear counters for a particular ACL, use the <listname> option:
ProCurve# clear access-list <listname>
For example, if you want to clear the counters for the Inside ACL, enter:
ProCurve# clear access-list Inside

Debugging ACLs

You can debug events associated with a particular ACL. From the enable mode
context, enter:
Syntax: debug access-list <listname>
Replace <listname> with the name of the ACL you want to debug.
For example, if you want to debug the Inside ACL, enter:
ProCurve# debug access-list Inside
Messages display dealing with the incoming packets that matches entries in
the ACL.
To stop the debug messages, enter the following command:
Syntax: no debug access-list <listname>
6-23