Applying Access Control to Router Interfaces
Quick Start
5-64
Valid interfaces include PPP interfaces, Frame Relay subinterfaces, ATM
subinterfaces, HDLC interfaces, Ethernet interfaces, and demand inter-
faces. (If you have enabled support for virtual LANs [VLANs], you must
apply the ACL to an Ethernet subinterface.)
7.
Apply the ACP to the interface by entering the following command from
the appropriate interface configuration mode context:
Syntax: access-policy <policyname>
For example, if you want to apply the WAN ACP to the PPP 1 interface,
enter:
ProCurve(config-ppp 1)# access-policy WAN
For more information about using ACPs to control access to a router
interface, read the detailed explanation in this chapter.