HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 882

Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Virtual Private Networks
14-82
Figure 14-61. Specifying the Local and Remote Networks for a Client-to-Site VPN
10. A new window displays, in which you can configure the VPN connection
to include the network containing addresses for the remote client. Leave
the Filter type at the default, permit, and the protocol at the default, any.
a. In the Source Data field, enter the IP address and subnet mask for the
local network you want to include in the VPN.
b. In the Destination Data field, enter the IP address and subnet mask
for the private network for remote users. For example, in figure 14-
61, the administrator has entered 192.168.100.0 255.255.255.0. This
network includes the range of addresses for remote clients shown
configured in figure 14-60.
c. Click Add.