HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 939

N o t e
1. Configure and activate the two Ethernet interfaces.
Manneheim(config)# interface ethernet 0/1
Mannheim(config-eth 0/1)# ip address 192.168.128.1 /24
Mannheim(config-eth 0/1)# no shutdown
Mannheim(config-eth 0/1)# interface ethernet 0/2
Mannheim(config-eth 0/2)# ip address 192.168.129.1 /24
Mannheim(config-eth 0/2)# no shutdown
2. Configure the connection to the ISP.
a. Configure the physical link using an E1 line.
Mannheim(config-eth 0/2)# interface e1 3/1
Mannheim(config-e1 3/1)# tdm-group 1 timeslots 1-31
Mannheim(config-e1 3/1)# no shutdown
b. Configure a PPP Data Link Layer protocol.
Mannheim(config-e1 3/1)# interface ppp 1
Mannheim(config-ppp 1)# ip address 10.20.1.1 /30
Mannheim(config-ppp 1)# description Connection to ISP
Mannheim(config-ppp 1)# no shutdown
c. Bind the E1 line to the PPP interface.
Mannheim(config-ppp 1)# bind 1 e1 3/1 1 ppp 1
Mannheim(config-ppp 1)# exit
Before connecting to the ISP, administrators activate the Secure Router
OS firewall to protect the private network.
Mannheim(config)# ip firewall
3. Configure the ADSL connection to Berlin.
a. Configure and activate the ADSL interface
Mannheim(config-ppp 1)# interface adsl 2/1
Mannheim(config-adsl 2/1)# training-mode multi-mode
Mannheim(config-adsl 2/1)# snr-margin 6
Mannheim(config-adsl 2/1)# no shutdown
b. Configure and activate the ATM interface.
Mannheim(config-adsl 2/1)# interface atm 1
Mannheim(config-atm 1)# no shutdown
Appendix A: Example Configuration
Configuring the Physical and Data Link Layers
A-11