HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 946

Appendix A: Example Configuration
Configuring the Physical and Data Link Layers
N o t e
A-18
2. Configure the connection to the ISP.
a. Configure the E1 interface.
Prague(config-eth 0/1)# interface e1 1/1
Prague(config-e1 1/1)# tdm-group 1 timeslots 1-31
Prague(config-e1 1/1)# no shutdown
b. Configure the PPP interface.
Prague(config-e1 1/1)# interface ppp 1
Prague(config-ppp 1)# ip address 10.40.1.1 /30
Prague(config-ppp 1)# description Connection to ISP
Prague(config-ppp 1)# no shutdown
c. Bind the E1 interface to the PPP interface.
Prague(config-ppp 1)# bind 1 e1 1/1 1 ppp 1
Prague(config-ppp 1)# exit
Before connecting to the ISP, administrators activate the Secure Router OS
firewall to protect the private network.
Prague(config)# ip firewall
3. Configure the Frame Relay connection to Berlin.
a. Configure and activate the E1 line.
Prague(config)# interface e1 1/2
Prague(config-e1 1/2)# tdm-group 1 timeslots 1-31
Prague(config-e1 1/2)# no shutdown
b. Create and activate the Frame Relay interface.
Prague(config-e1 1/2)# interface frame 1
Prague(config-fr 1)# frame-relay lmi-type ansi
Prague(config-fr 1)# no shutdown
c. Create and configure the Frame Relay subinterface.
Prague(config-fr 1)# interface frame 1.1
Prague(config-fr 1.1)# ip address 10.1.4.2 /30
Prague(config-fr 1.1)# frame-relay interface-dlci 102
Prague(config-fr 1.1)# description Connection to Berlin
d. Bind the E1 interface to the Frame Relay interface
Prague(config-fr 1.1)# bind 2 e1 1/2 1 frame 1
Prague(config-fr 1.1)# exit