HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 875

Using the Web Browser Interface for Advanced Configuration Tasks
Figure 14-55. Configuring IKE for a VPN Connection
3. Now move to the IKE Configuration section of the VPN Peer Configu-
ration for "<VPN mapname>" window.
4. If you have selected Static Addressed, the wizard will display a section
for the Peer IP Address. You should enter the peer's public IP address.
This section will not display if you selected Dynamically Addressed.
5. Select the Remote ID for the new VPN peer from the pull-down menu. As
well as the options for ID type discussed when configuring a connection
with the VPN wizard, you can select IP Address or ASN1-DN.
You should only select IP Address if the peer has a static address. Enter
the same address that you entered for the Peer IP Address.
You can use the ASN1-DN option when you are using digital certificates
as the IKE authentication method. You must enter the fields exactly as
they are in the certificate. You can use the wildcard character (*) to allow
any value for some of the fields.
6. If you are using preshared keys, enter the key in the Preshared Key field.
Setting Up Virtual Private Networks
14-75