HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 733

route-map ISP2In permit 10
route-map ISP2In permit 20
Sets higher
preference for
second half of
routes received
from this
!
neighbor
router bgp 3
Advertises only
two route
summaries for
local networks
!
Null routes for
ip route 10.1.0.0 255.255.128.0 null 0
the route
summaries ip route 10.1.128.0 255.255.128.0 null 0
!
end
Figure 13-27.Example 4: Router A Running-Config (Continued)
match ip address prefix-list External1
set local-preference 125
set comm-list clear delete
set community no-export
match ip address prefix-list External2
set local-preference 135
set comm-list clear delete
set community no-export
no auto-summary
no synchronization
bgp router-id 10.1.0.3
network 10.1.0.0 mask 255.255.128.0
network 10.1.128.0 mask 255.255.128.0
neighbor 10.1.0.1
no default-originate
route-map ISP1In in
route-map ISP1Out out
send-community standard
soft-reconfiguration inbound
remote-as 1
neighbor 10.2.0.2
no default-originate
route-map ISP2In in
route-map ISP2Out out
send-community standard
soft-reconfiguration inbound
remote-as 2
IP Routing—Configuring RIP, OSPF, BGP, and PBR
Clears community
attributes from
received routes
Prevents the router
from advertising
external routes to
another ISP
Advertises routes'
community attributes
Configuring BGP
13-119