Ike Settings (Custom Setup Only) - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Virtual Private Networks
Select one of these options from the Local ID Type pull-down menu. By
default, the VPN wizard uses Domain Name as the Local ID Type and the
hostname configured on the local router as the Local ID Value.
If you choose an IP address for the Local ID Type, the Local ID Value is the
address for the interface through which the router connects to the VPN peer.

IKE Settings (Custom Setup Only)

In this window, you can specify in which modes the local router can initiate
and respond to IKE. Main mode is more secure than aggressive mode because
it protects the peers' authentication information. However, aggressive mode
is less taxing on the processor.
Select either Main Mode or Aggressive Mode from the Initiate Using pull-
down menu to specify the mode in which the router initiates IKE.
When the peer initiates IKE, the local router must be able to respond in the
same mode. You can configure the router to respond to either main or
aggressive mode, or both. Select the desired setting from the Respond Using
pull-down menu.
Figure 14-50. Establishing Security Parameters for the IKE SA
14-67