Vpn Wizard; Vpn Peer Name - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Virtual Private Networks
N o t e
14-60
You can also use advanced options to alter security parameters according to
your organization's policies.
To access the VPN wizard, select VPN Wizard under VPN in the left
navigation bar.

VPN Wizard

The VPN wizard guides you through the configuration of a VPN. It manages
the configuration of the necessary ACLs, IKE policies, and crypto map entries
based on the information you give it. You must identify:
the local router's VPN interface
whether the VPN peer is static, dynamic, or mobile
IKE mode config settings (for client-to-site VPNs only)
extended authentication settings (for client-to-site VPNs only)
the remote network(s)
the local network(s)
peer authentication method
remote ID—domain name, email address, IP address, any
local ID—domain name, email address, IP address
When you start the VPN wizard, a Welcome screen displays. Click Next.
You must then choose between typical or custom setup. Custom setup is
exactly like typical setup except that it includes two extra windows in which
you can alter IKE and IPSec security parameters. Select the type of setup and
click Next.

VPN Peer Name

You should enter the domain name for the device to which the local router
will connect. This name identifies the VPN peer, and, depending on how your
configure the peer's remote ID, IKE may use this name when authenticating
the peer.
If you prefer, you can enter any alphanumeric name that identifies the con-
nection to you. You can also use the wizard to help build the initial VPN and
then modify the configuration in the CLI for more meaningful naming.
Click Next.