Managing Autosynchtm, Files, Firmware, And Boot Software - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Managing AutoSynch
and Boot Software
In the Utilities section of the Web browser interface, you can do basic file
management tasks, manage AutoSynch™, and set the router's firmware and
boot software using the Web browser interface.
The Utilities section of the Web browser interface includes five subsections:
AutoSynch™
Configuration
Firmware
Reboot Unit
Telnet to Unit
The AutoSynch™ section allows you to enable AutoSynch™ and force
synchronization. For more information on AutoSynch™ functions, see the
Basic Management and Configuration Guide, Chapter 1: Overview.
The Configuration section allows you to create and manage configuration
files.
In the Firmware section, you can configure the router's primary and backup
firmware files, view the drive space used and free on the router's internal flash
and compact flash memories, upload, and delete firmware files.
The Reboot Unit section provides two options for rebooting the router: save
and reboot or reboot without saving.
The Telnet to Unit section opens a terminal session software on your PC and
begins to negotiate a Telnet session between your PC and the router.
AutoSynch
™
1. To manage AutoSynch™ in the Web browser interface, click Utilities >
AutoSynch in the left navigation bar. The AutoSynch™ Mode window is
displayed. From this window, you can enable AutoSynch™, force syn-
chronization, and troubleshoot AutoSynch™ operation.
2. To enable AutoSynch™, click the AutoSynch Mode box.
3. Click Apply. This will signal the AutoSynch™ function to begin synchro-
nization efforts.

Managing AutoSynchTM, Files, Firmware, and Boot Software

, Files, Firmware,
TM
14-5