Configuring Llq - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks

Configuring LLQ

To enable LLQ in the Web browser interface, first configure a QoS map with
an entry for each low latency queue. The entry defines the criteria for traffic
and sets the maximum bandwidth guaranteed to such traffic. You then assign
the queue to an interface.
Criteria include:
IP precedence values
Diffserv values
IP header fields
destination UDP realtime protocol (RTP) port
bridged traffic
To configure LLQ, complete these steps:
1. Select QoS Maps under Router/Bridge in the left navigation bar.
2. Enter a new QoS map entry in the Add New QoS Map section of the
Modify/Delete QoS Maps window. Enter the name in the Map Name field
and the sequence number in the Sequence Number field. You will apply
all QoS map entries with the same name to the interface; the sequence
number determines the order in which the router will process these
entries.
Figure 14-39. Creating a QoS Map Entry
Configuring Quality of Service
14-53