HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 614

Link Layer Discovery Protocol
Quick Start
12-16
b. You can also prevent the router from sending any LLDP messages,
while still allowing it to listen for messages.
Syntax: no lldp send
c. To only prevent the router from receiving LLDP messages, enter:
Syntax: no lldp receive
Enter a command without the no option to re-enable the function.
2. You can prohibit an interface from sending some kinds of information
about the router, but allow it to send other information. Move to the
interface's configuration mode context. Then enter this command fol-
lowed by the keyword for the type of information that you want to restrict:
Syntax: no lldp send [management-address | port-description | system-capabil-
ities | system-description | system-name]
Table 12-3 explains what information is associated with each keyword.
Enter the command without the no option to re-enable the router to send
that information.
Table 12-3. Prohibiting an Interface from Sending Certain LLDP Messages
Keyword
management-address
port-description
system-capabilities
system-description
system-name
3. To view information about the router's neighbors, move to the global
configuration mode context and enter:
Syntax: show lldp neighbors [interface <interface ID>] [detail]
Use the interface <interface ID> option to view information about only
a specific interface's neighbor. The detail option displays all LLDP infor-
mation.
4. To view information about a specific device, enter:
Syntax: show lldp device <system name>
Information
IP address at which a management process can reach
the router
interface's port ID
system's capabilities (for example, router or bridge)
router model and software version
router's hostname