HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 942

Appendix A: Example Configuration
Configuring the Physical and Data Link Layers
N o t e
A-14
You can add 1 to the wildcard bits for the source address to select
traffic from both LANs at Mannheim in the same command. That is,
192.168.128.0 0.0.1.255 matches both 192.168.128.0 /24 and
192.168.129.0 /24. For example, to configure the ACL for traffic that
will trigger the ISDN connection from Mannheim to Dublin, enter:
Mannheim(config)# ip access-list extended Demand1
Mannheim(config-ext-nacl)# permit ip 192.168.128.0 0.0.1.255 192.168.192.0
0.0.0.255
b. Configure the demand interface for the connection to Dublin.
Mannheim(config)# interface demand 1
Mannheim(config-demand 1)# ip address 10.2.3.1 /30
Mannheim(config-demand 1)# match-interesting list Demand1
Mannheim(config-demand 1)# resource pool Pool1
Mannheim(config-demand 1)# connect-sequence 10 dial-string
0035315551213 forced-isdn-64k busyout-threshold 3
Mannheim(config-demand 1)# connect-sequence 20 dial-string
0035315551223 forced-isdn-64k busyout-threshold 3
Mannheim(config-demand 1)# description Connection to Dublin
c. Configure the demand interface connection with Prague.
Mannheim(config-demand 1)# interface demand 2
Mannheim(config-demand 2)# ip address 10.2.4.1 /30
Mannheim(config-demand 2)# match-interesting list Demand2
Mannheim(config-demand 2)# resource pool Pool2
Mannheim(config-demand 2)# connect-sequence 10 dial-string
004202551214 forced-isdn-64k busyout-threshold 3
Mannheim(config-demand 2)# connect-sequence 20 dial-string
004202551224 forced-isdn-64k busyout-threshold 3
Mannheim(config-demand 2)# description Connection to Prague
6. Configure the ISDN groups.
Mannheim(config-demand 2)# isdn-group 1
Mannheim(config-isdn-group 1)# connect bri 1/1
Mannheim(config-isdn-group 1)# resource pool-member Pool1
Mannheim(config-isdn-group 1)# isdn-group 2
Mannheim(config-isdn-group 2)# connect bri 1/2
Mannheim(config-isdn-group 2)# resource pool-member Pool2