HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 731

9. Apply the policies to the neighbors. Allow the router to advertise commu-
nity attributes if so desired and if permitted by your ISP.
ProCurve(config)# router bgp 3
ProCurve(config-bgp)# neighbor 10.10.0.1
ProCurve(config-bgp-neighbor)# route-map ISP1In in
ProCurve(config-bgp-neighbor)# route-map ISP1Out out
ProCurve(config-bgp-neighbor)# send-community standard
ProCurve(config-bgp-neighbor)# neighbor 10.20.0.1
ProCurve(config-bgp-neighbor)# route-map ISP2In in
ProCurve(config-bgp-neighbor)# route-map ISP2Out out
ProCurve(config-bgp-neighbor)# send-community standard
Figure 13-26 and Figure 13-27 show the running-config for the routing proto-
cols configured for Router A in this example.
IP Routing—Configuring RIP, OSPF, BGP, and PBR
Configuring BGP
13-117