Viewing Demand Sessions; Viewing The Resource Pool - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Secure router
Hide thumbs Also See for ProCurve Secure Router 7203 dl:
Table of Contents

Advertisement

Configuring Backup WAN Connections
Viewing Backup Configurations and Troubleshooting Backup Connections
3-78

Viewing Demand Sessions

You can view all of the dial-up connections currently established through
demand routing. From the enable mode context, enter:
ProCurve# show demand sessions
The sessions are listed in the order in which they were established. (See
Figure 3-24.) For each session, this command lists:
demand interface through which the connection was established
IP address of the demand interface and the far-end router
interesting traffic that triggered the connection
number of links for each session if MLPPP is enabled
BRI interfaces through which the links were established
connection time
idle-timeout setting
Session 1
Interface demand 1
Local IP address = 10.1.1.1
Remote IP address = 10.2.2.1
Remote Username =
Dial reason: ip (s=192.168.1.23, d=192.168.2.23)
Link 1
Dialed number =
Resource interface = 1_0(bri 2/3.1)
Connect time: 0:1:28
Idle Timer: 120
Figure 3-24. Viewing Demand Sessions

Viewing the Resource Pool

You can view which interfaces have been assigned to a particular resource
pool. You can also view which demand interfaces use the pool. (See Figure 3-
25.) From the enable mode context, enter:
ProCurve# show demand resource pool <poolname>
Pool backup
Resources:
Demand Interfaces:
Figure 3-25. Viewing a Resource Pool
Connection is through
channel 1 on the BRI 2/3
interface (bri 2/3.1)
1_0, 1_1, bri 1/3
demand 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve secure router 7102 dl

Table of Contents