Configuration; Configuring Appliance Password And Network Addresses - HP StorageWorks HA-Fabric Manager Installation Manual

Chapter 3. Configuration

Configuring Appliance Password and Network Addresses

Verify the type of LAN installation with the customer's network administrator. If the HAFM
server or equipment cabinet is installed on a dedicated LAN, network information does not
require change. Change the default password for the server's LCD panel (if required by the
customer), then go to
If the HAFM appliance is installed on a public LAN segment, change the default password for
the appliance's LCD panel and the following transmission control protocol/internet protocol
(TCP/IP) network information to conform to the customer's LAN addressing scheme:
• IP address.
• Subnet mask.
Note
At some customer installations, TCP/IP addresses for the appliance may be allocated automatically
using dynamic host configuration protocol (DHCP).
35
Configuring Additional Appliance
hp StorageWorks HA-Fabric Manager Appliance Installation
Information.
Guide