Viewing Access Policy Statistics - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

ProCurve# show ip policy-sessions
Src IP Address Src Port
---------------- ---------
Policy class "Inside":
tcp (80)
192.168.20.1 2001
Policy class "Outside":
tcp (20)
192.168.100.99 1908
Policy class "self":
icmp (50)
0.0.0.0 10
Figure 6-7. Displaying IP Policy Sessions
If you want to view information about the sessions associated with a specific
ACP, enter:
ProCurve# show ip policy-sessions <policyname>
Replace <policyname> with the name of the specific ACL.

Viewing Access Policy Statistics

You can also display a summary of ACP statistics by entering the following
command from the enable mode context:
ProCurve# show ip policy-stats
The Secure Router OS displays the total number of current sessions. (See
Figure 6-8.) It also lists all ACPs assigned to interfaces and the entries of each
ACP. It displays:
Dest IP Address
--------------
172.16.1.1
172.16.3.10
192.168.100.1
the number of sessions established using each ACP (policy class)
the number of maximum sessions allowed for that ACP
the number of hits for each entry in the ACP
the number of bytes for traffic associated with a particular ACP entry
Configuring Network Address Translation
Dst Port NAT IP Address
-------- ---------------
80 d 10.10.3.10
80 d 10.10.3.10
10
Viewing ACLs and ACPs
NAT Port
-------
80
80
6-19