Cloud Pak For Data System 1G Management, Hub Switch Hardware Specifications - IBM 3454-A3C Customer Install Manual

Cloud Pak for Data System 1G
management, hub switch hardware
specifications
Hardware specifications below provide information for Cloud Pak hardware, including:
dimensions, electrical power and cooling. .
All component installation documents are available on the Safety and Regulatory CD
that comes with your Cloud Pak for Data System components.
3454-A3C, Cloud Pak for Data System Management, Hub Switch (1G switch) [see
Notes 1, 2]
Table 1
Width Depth
440 mm 350 mm
(17.3 in) (16.1 in)
Notes:
[1] The power supplies automatically accept any voltage within the 200-240 V AC,
50/60 Hz rated-voltage range. If dual power supplies are installed and operating, the
power supplies draw approximately equal current from the utility (electrical supply) and
provide approximately equal current to the load.
[2] Power draw and heat load vary greatly by configuration and work load. When you
plan for an electrical system, it is important to use the maximum values but actual power
and cooling will be less.
© Copyright IBM Corporation 2019, 2020.
EIA
Height Weight
units
45 mm 5.4 kg
1
(1.70 in) (11.9 lb)
Amperage
(Max)
1.5 amps
Customer Install Guide, 1G Switch
Power Cooling
(Max) (Max)
300 1000
watts BTU/Hr
15