Table of Contents
Advertisement
Configure public LAN addresses (optional)
50
SAN32M-2 Installation and Service Manual
6. Use the arrow keys as described in
mask, then press ENTER. A Save Change? Yes, Save!! message
appears.
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the panel returns to the LAN 1 Setting?? message, and the
LAN 2 subnet mask changes.
8. Record the private LAN IP address and subnet mask for reference
if the server hard drive fails and must be restored.
To optionally configure TCP/IP network information for the public
LAN connection (LAN 1):
1. At the management server LCD panel, press ENTER. The
Welcome!! or operational information message changes to an
Input Password 0**** message.
2. Using the
button to increment a digit, the
decrement a digit, the
button to move the cursor right, input the default or changed
password, and press ENTER. The LAN 1 Setting?? message
appears at the LCD panel.
3. Press ENTER and the default IP address of 192.168.0.1. appears.
4. Use the arrow keys as described in
address, then press ENTER. A Save Change? Yes, Save!! message
appears.
5. Press ENTER. The LAN 1 IP address changes and the default
subnet mask of 255.0.0.0 appears.
6. Use the arrow keys as described in
mask, then press ENTER. A Save Change? Yes, Save!! message
appears.
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the panel returns to the LAN 1 Setting?? message, and the
LAN 1 subnet mask changes.
8. Record the public LAN IP address and subnet mask for reference
if the server hard drive fails and must be restored.
step 2
to input a new subnet
button to
button to move the cursor left, and the
step 2
to input a new IP
step 2
to input a new subnet
Advertisement
Table of Contents
