D Transmitting An Rtty Memory - Icom IC-7100 Instruction Manual

Previous view
4
RECEIVE AND TRANSMIT
The functions for RTTY operation (Continued)
D
Transmitting an RTTY memory
Previously entered characters can be sent using the
RTTY memory. Contents of the memory are enter in
the RTTY Memory (Edit) screen.
q
In the RTTY mode, push
times to select the "M-2" screen (Menu M-2).
w D) to display the RTTY decoder
Touch [DEC](
screen.
• Touch [WIDE](D) to toggle the decode screen size be-
tween normal and wide.
e D) to display the RTTY memory
Touch [RTM](
screen.
r X](D) to select the memory group to trans-
Touch [
mit.
• Touch [X](D) to toggle the memory group between RT1–
RT4 and RT5–RT8.
t
Touch one of the memory keys, [RT1] to [RT4], or
[RT5] to [RT8](D).
• The TX/RX indicator lights red.
• The TX contents are displayed beside the "
y
Push (C) to return to the "M-2" screen (Menu
MENU
M-2).
For your information
When an external keypad is connected to [MIC] con-
nector on the Controller, one of RT1 to RT4 RTTY
memory contents can be transmitted while the RTTY
decode screen is selected in the RTTY mode. (pgs.
18, 133)
L eft D isplay R ight
C enter
(C) one or more
MENU
" icon.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
4-17
RTTY memory screen (RT1–RT4)
RTTY memory screen (RT5–RT8)
• Transmits RT6
The TX contents are displayed
Touch [DEC]
Touch [RTM]
Touch [RT6]
" " blinks