D Transmitting An Rtty Memory Content - Icom IC-905 Advanced Manual

1
ADVANCED OPERATIONS
Operating RTTY (FSK)

D Transmitting an RTTY memory content

You can transmit the preset characters on the RTTY
MEMORY screen�
L You can edit the contents by touching [EDIT] on the RTTY
MEMORY screen�
1� Display the RTTY DECODE screen in the RTTY
mode�
» DECODE
2� Touch [TX MEM]�
3� Touch an RTTY memory between [RT1] and [RT8]
to transmit� (Example: RT1)
Transmitting
Transmitting contents are displayed�
• The TX status indicator lights red and the Po meter
swings�
L To cancel the transmission and to return to the RTTY
DECODE screen, push
L After transmitting, automatically returns to receive�
�
Memory
RT1 ↵ DE ICOM ICOM K ↵
RT2
↵ DE ICOM ICOM ICOM K ↵
RT3 ↵ QSL UR 599–599 BK ↵
RT4 ↵ QSL DE ICOM ICOM UR 599-599 BK ↵
RT5 ↵ 73 GL SK ↵
RT6 ↵ CQ CQ CQ DE ICOM ICOM ICOM K ↵
↵ MY TRANSCEIVER IS IC–905 & ANTENNA
RT7
IS A PARABOLIC DISH� ↵
↵ MY RTTY EQUIPMENT IS INTERNAL FSK
RT8
UNIT & DEMODULATOR OF THE IC–905� ↵
When an external keypad is connected:
You can transmit the preset contents in the RTTY
memory (RT1 ~ RT8) from an external device by
setting the "External Keypad," and then connecting
an external keypad to the [ELEC-KEY] jack on the
IC-905�
» SET > Connectors > External Keypad
1-9
Preset characters by default