D Adjusting The Emr Af Level; Display Type Setting - Icom ID-51A Advanced Manual

Previous view
9
D-STAR OPERATION <ADVANCED>
■ Using the EMR communication function (Continued)

D Adjusting the EMR AF level

The audio output level when an EMR signal is received
is adjustable between 0 and 39.
When an EMR signal is received, the audio will be
heard at the preset level, or the [VOL] control level,
whichever is higher.
To disable the setting, set it to
q Push [MENU] .
w Push D-pad( ) to select the root item ("DV Set"),

and then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "EMR AF Level," and then

push D-pad(Ent).
r Push D-pad( ) to adjust the EMR audio output level

between 0 (minimum) and 39 (maximum) in single
digit steps. (Default: 19)
t Push [MENU] to exit the MENU screen.

■ Display type setting

To see repeater names, call signs, and so on better,
you can change the letter size in the DR screen.
q Push [QUICK] .
w Push D-pad( ) to select "Display Type," and then

push D-pad(Ent).
e Push D-pad( ) to select "Large," and then push D-

pad(Ent).
• The display size changes to large.
"0."
(Default: Normal)
9-9