Imaging Ay - Page Start Delay, Start Of Page - Kodak DryView 5800 Service Manual

IMAGING AY - Page Start Delay, Start of Page

Adjustment Specification
Purpose:
Specification:
Special Tools:
Prerequisites
To Check
2G0947 - 31JAN08
To adjust Start of Page timing to obtain a 2 mm (0.08 in.) half-tone density
border at the leading edge of the film.
A 2 mm (0.08 in.) half-tone border only is visible at the leading edge of the film.
•
LAPTOP COMPUTER with Microsoft INTERNET EXPLORER V 5.5
or higher
•
SERVICE TOOL
•
CROSSOVER CABLE, TL5568
None
1. Log on to the SERVICE TOOL (see Installation Instructions,
Onto the SERVICE TOOL" on page
2. From the Service menu, select Diagnostics>DRE>Advanced Test Print.
3. In the Test Profile field, use the drop-down menu to select "Smpte8Bit".
4. Click [Run].
IMPORTANT
:
There should not be any printing above the "virtual notch".
Adjustments and Replacements
2-4).
"Logging
3-9