Doing The Scp Services Configuration - Kodak DryView 5800 Service Manual

Installation Instructions

Doing the SCP Services Configuration

2-22
1. Have each SCU send an image to make a connection with the IMAGER.
2. Select Configuration>DICOM SCP>SCP Configuration.
3. When the SCP Configuration screen appears, select the "SCP Config
AutoSetup" tab.
Note:
•
The information in the SCU field includes, in order: IP Address and AE
Title of the SCU that will send the image, and AE Title of the destination.
•
The parameter values on the screen apply to the modality identified in the
SCU field.
4. At the top of the screen, use the drop-down menu to select an SCU.
5. Is the information for the selected SCU correct?
Yes
Do Step 4 and Step 5 for each SCU in
the list.
6. After the configuration of all SCUs is completed, continue with
"Checking Image
a. Click Modify.
b. From the drop-down menus select
the correct information.
c. Click Save.
d. Do Step 4
in the list.
Quality".
No
and Step 5 for each SCU
2G0947 - 31JAN08