Kodak DryView 5800 Service Manual page 150

Diagnostics
LOCAL PANEL LEDs and Buttons
5-2
1
2
3
4
1 Ready LED. This LED, when lit indicates that the IMAGER is ready
for printing. When flashing, the IMAGER is processing and printing
films. When unlit, the IMAGER is not ready to print.
2 Error LED. When lit, this LED indicates that the IMAGER has an
error. An error code will appear on the display screen indicating what
the actual error is.
3 Attention LED. When lit, this LED indicates a condition that requires
attention, such as "out of film". The IMAGER can still process and
print films from unaffected FILM TRAYS.
4 Warming LED. When lit, this LED indicates that the IMAGER is
warming up. A timer is also shown on the display screen indicating the
amount of time, in minutes, before the IMAGER reaches operating
temperature.
5 Display Screen. Displays codes and icons that indicate the status and
operating condition of the IMAGER.
6 Maintenance Reset Button/LED. Pushing and holding the button for
5 seconds displays a menu and allows the user to perform various reset
functions.
7 Unlock Buttons/LEDs. Used to unlock the FILM TRAYS.
Note:
The trays will not unlock unless a FILM SAVER is installed
in trays that have film.
8 Calibration Buttons/LEDs. Used to initiate a manual film calibration.
5
{
8
2G0947 - 31JAN08
6
{
7