Updating The Thumb Drive With A New Version Of System Software - Kodak DryView 5800 Service Manual

Additional Service Procedures
Updating the THUMB DRIVE With a New Version of System
Software
8-4
IMPORTANT
:
You must energize your LAPTOP COMPUTER before inserting the THUMB
DRIVE into the USB port.
1. Energize your LAPTOP COMPUTER.
2. Insert:
•
the THUMB DRIVE into the USB port on your LAPTOP
COMPUTER.
•
the "Ghost" CD into the CD-ROM drive of your LAPTOP
COMPUTER.
3. Copy the software from the CD-ROM to the THUMB DRIVE.
NOTE:
The old version of system software on the THUMB DRIVE will be
overwritten by the new version.
4. When the copy is complete, remove the THUMB DRIVE and CD-ROM
from your LAPTOP COMPUTER.
2G0947 - 31JAN08