Front Panel - Kodak DryView 5800 Service Manual

FRONT PANEL

Prerequisites:
To Remove:
To Install:
2G0947 - 31JAN08
Remove the FILM TRAYS.
1. De-energize the IMAGER (see Installation Instructions,
the IMAGER" on page
2 SCREWS
2 LANYARDS
FRONT PANEL
2. Open:
•
TOP COVER
•
FRONT PANEL
3. Disconnect the LOCAL PANEL CONNECTOR.
4. Remove 2 SCREWS from the FRONT PANEL holding the 2
LANYARDS.
5. Tip the FRONT PANEL out and lift it from the IMAGER.
1. Reverse the steps in the removal procedure.
Adjustments and Replacements
2-3).
TOP COVER
LOCAL PANEL
CONNECTOR
"De-energizing
3-17