Kodak DryView 5800 Service Manual page 68

Adjustments and Replacements
To Install:
3-26
STEEL ROD
INLET SHIELD
6. To remove the PROCESSOR AY:
a. Put 1 hand under the INLET SHIELD.
b. Grip the STEEL ROD near the FRAME.
c. Lift and place the PROCESSOR AY on a flat, stable surface.
IMPORTANT
:
To prevent damage to CABLES, install new TIE WRAPS in place of those that
were cut.
1. Reverse the steps in the removal procedure.
2G0947 - 31JAN08